About retaining walls consists materials

Brick, stone, brick, cement, plastic, steel or wood materials such as maintaining the structure, including the walls. Some areas in the mountains are a little different rolling terrain. For these areas, retaining walls, steps, or to maintain the level of the building area are allowed. Maintain the walls of the ancient Roman civilization, has been used in road construction. They are widely used in Europe and many castles can be found. Since over time, and keep the wits of many kinds of wall building is being used. For each type of wall is described below.

Followed by the quality or weight and gravity of the earth wall to resist pressure. The walls are usually 3-4 feet average height. They are made in units of mortar less stone or brick. Due to the construction of the gravity of earth or clay, is the ability to save it again. Is the amount of material composition of the wall? These materials are arranged to create walls. This material is greater than in the soil weight or force created by friction. At the top of the base of the wall thickness. To improve stability, to keep the soil on the re wall of the process of "abuse" is known as in this process, a high wall, and they tilted back. Abuse is to extend the life of the gravity of the wall, otherwise it will pay out. Gravity for a high number of building materials, wall construction. It is hard to establish the cause and they get a high wall, so this is no problem.

The wall is a cantilever retaining wall height. Here, the scaffold tied to the wall thickness. Cantilever wall, wait a sufficient amount of an appropriate design soil again. Maintain the wall in the basement of an example of this type in a typical house. Production of the cantilever wall has been turned into "T" is in "words" cantilever "at one end of a fixed" in the footer of the transformation pressure, the pressure level of the cantilever wall perpendicular to the floor from the wall behind the walls wide enough to prevent dumping That should be here, means to predict the beam, as well as the footer and the wall thickness of the retaining earth wall is very important.